Category:ASTM Codes
From Piping Designer
Code Sections
Section 01 - Iron and Steel Products
- 01.01 Steel - Piping, Tubing, Fittings
- 01.02 Ferrus Castings; Ferroalloys
- 01.03 Steel - Plate, Sheet, Strip, Wire; Stainless Steel Bar
- 01.04 Steel - Structural, Reinforcing, Pressure Vessel, Railway
- 01.05 Steel - Bars, Forgings and Billets, Bearing, Chain, Tool
- 01.06 Coated Steel Products
- 01.07 Ships and Marine Technology
- 01.08 Fasteners; Rolling Element Bearings
Section 02 - Nonferrous Metal Products
- 02.01 Copper and Copper Alloys
- 02.02 Aluminum and Magnesium Alloys
- 02.03 Electrical Conductors
- 02.04 Nonferrous Metals - Nickel, Cobalt, Lead, Tin, Zinc, Cadmium, Precious, Reactive, Refractory Metals and Alloys; Materials for Thermostats, Electrical Heating and Resistance, Contacts, and Connectors
- 02.05 Metallic and Inorganic Coatings; Metal Powders and Metal Powder Products
Section 03 - Metals Test Methods and Analytical Procedures
- 03.01 Metals - Mechanical testing; Elevated and Low-Temperature Tests; Metallography
- 03.02 Corrosion of Metals; Wear and Erosion
- 03.03 Nondestructive Testing
- 03.04 Magnetic Properties
- 03.05 Analytical Chemistry for Metals, Ores, and Related Materials
- 03.06 Molecular Spectroscopy; Surface Analysis
Section 04 - Construction
- 04.01 Cement; Lime; Gypsum
- 04.02 Concrete and Aggregates
- 04.03 Road and Paving Materials; Vehicle-Pavement Systems
- 04.04 Roofing and Waterproofing
- 04.05 Chemical-Resistant Nonmetallic Materials; Vitrified Clay Pipe; Concrete Pipe; Fiber-Reinforced Cement Products; Mortars and Grouts; Masonry; Precast Concrete
- 04.06 Thermal Insulation; Building and Environmental Acoustics
- 04.07 Building Seals and Sealants; Fire Standards; Dimension Stone
- 04.08 Soil and Rock (I)
- 04.09 Soil and Rock (II)
- 04.10 Wood
- 04.11 Building Constructions (I)
- 04.12 Building Constructions (II); Property Management Systems; Technology and Underground Utilities
- 04.13 Geosynthetics
Section 05 - Petroleum Products, Lubricants and Fossil Fuels
- 05.01 Petroleum Products and Lubricants (I)
- 05.02 Petroleum Products and Lubricants (II)
- 05.03 Petroleum Products and Lubricants (III)
- 05.04 Petroleum Products and Lubricants (IV)
- 05.05 Combustion Characteristics; Manufactured Carbon and Graphite Products; Catalysts
- 05.06 Gaseous Fuels; Coal and Coke
Section 06 - Paints, Related Coatings and Aromatics
- 06.01 Paint - Tests for Chemical, Physical and Optical Properties; Appearance
- 06.02 Paint - Products and Applications; Protective Coatings; Pipeline Coatings
- 06.03 Paint - Pigments, Drying Oils, Polymers, Resins, Naval Stores, Cellulosic Esters, and Ink Vehicles
- 06.04 Paint - Solvents; Aromatic Hydrocarbons
Section 07 - Textiles
Section 08 - Plastics
- 08.01 Plastics (I)
- 08.02 Plastics (II)
- 08.03 Plastics (III)
- 08.04 Plastic Pipe and Building Products
Section 09 - Rubber
- 09.01 Rubber, Natural and Synthetic - General Test Methods; Carbon Black
- 09.02 Rubber Products, Industrial - Specificatins and Related Test Methods; Gaskets; Tires
Section 10 - Electrical Insulation and Electronics
- 10.01 Electrical Insulation (I)
- 10.02 Electrical Insulation (II)
- 10.03 Electrical Insulating Liquids and Gases; Electrical Protective Equipment
- 10.04 Electronics; Declarable Substances in Materials
Section 11 - Water and Environmental Technology
- 11.01 Water (I)
- 11.02 Water (II)
- 11.03 Occupational Health and Safety; Protective Clothing
- 11.04 Waste Management
- 11.05 Pesticides; Environmental Assessment; Hazardous Substances and Oil Spill Response
- 11.06 Biological Effects and Environmental Fate; Biotechnology
- 11.07 Atmospheric Analysis
Section 12 - Nuclear, Solar and Geothermal Energy
Section 13 - Medical Devices and Services
- 13.01 Medical and Surgical Materials and Devices; Anesthetic and Respiratory Equipment; Manufacture of Pharmaceutical Products
- 13.02 Emergency Medical Services; Search and Rescue
Section 14 - General Methods and Instrumentation
- 14.01 Healthcare Informatics
- 14.02 General Test Methods; Forensic Psychophysiology; Forensic Sciences; Terminology; Conformity Assessment; Statistical Methods; Nanotechnology
- 14.03 Temperature Measurement
- 14.04 Laboratory Apparatus; Degradation of Materials; SI; Oxygen Fire Safety
Section 15 - General Products, Chemical Specialties and End Use Products
- 15.01 Refractories, Activated Carbon; Advanced Ceramics
- 15.02 Glass; Ceramic Whitewares
- 15.03 Space Simulation; Aerospace and Aircraft; Composite Materials
- 15.04 Soaps and Other Detergents; Polishes; Leather; Resilient Floor Coverings
- 15.05 Engine Coolants; Halogenated Organic Solvents and Fire Extinguishing Agents; Industrial and Specialty Chemicals
- 15.06 Adhesives
- 15.07 Sports Equipment and Facilities; Pedestrian/Walkway Safety and Footwear; Amusement Rides and Devices; Snow Skiing
- 15.08 Sensory Evaluation; Livestock, Meat, and Poultry Evaluation Systems; Vacuum Cleaners; Security Systems and Equipment; Detention and Correctional Facilities; Food Service Equipment; Homeland Security Applications
- 15.09 Paper; Business Imaging Products
- 15.10 Packaging; Flexible Barrier Materials
- 15.11 Consumer Products; Light Sport Aircraft; Unmanned Aircraft Systems; Normal and Utility Category Airplane Electrical Wiring Systems; Unmanned Maritime Vehicle Systems (UMVS)
Codes
- ASTM A27 / A27M - Specification for Steel Castings, Carbon, for General Application
- ASTM A53 / A53M - Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
- ASTM A105 / A105M - Specification for Carbon Steel Forgings for Piping Applications
- ASTM A106 / A106M - Specification for Seamless Carbon Steel Pipe for High-Temperature Service
- ASTM A108 - Specification for Steel Bar, Carbon and Alloy, Cold-Finished
- ASTM A120 - Specification for Pipe, Steel, Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless for Ordinary Uses
- ASTM A126 - Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
- ASTM A153 / A153M - Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
- ASTM A182 / A182M - Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
- ASTM A193 / A193M - Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications
- ASTM A194 / A194M - Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
- ASTM A203 / A203M - Specification for Pressure Vessel Plates, Alloy Steel, Nickel
- ASTM A204 / A204M - Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum
- ASTM A216 / A216M - Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
- ASTM A217 / A217M - Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
- ASTM A234 / A234M - Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
- ASTM A240 / A240M - Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
- ASTM A276 - Specification for Stainless Steel Bars and Shapes
- ASTM A285 / A285M - Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
- ASTM A302 / A302M - Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
- ASTM A307 - Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
- ASTM A312 / A312M - Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
- ASTM A335 / A335M - Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
- ASTM A350 / A350M - Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
- ASTM A351 / A351M - Specification for Castings, Austenitic, for Pressure-Containing Parts
- ASTM A352 / A352M - Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service
- ASTM A358 / A358M - Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
- ASTM A369 / A369M - Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
- ASTM A376 / A376M - Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service
- ASTM A387 / A387M - Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
- ASTM A395 / A395M - Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
- ASTM A403 / A403M - Specification for Wrought Austenitic Stainless Steel Piping Fittings
- ASTM A430 / A430M - Specification for Austentic Steel Forged and Bored Pipe for Hi GH-Temperature Service (Withdrawn 1995). Replaced by: ASTM A312 / A312M
- ASTM A439 - Specification for Austenitic Ductile Iron Castings
- ASTM A461 - Specification for Precipitation Hardening Alloy Bars, Forgings, and Forging Stock for High-Temperature Service (Withdrawn). Replacement by ASTM A564
- ASTM A479 / A479M - Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
- ASTM A494 / A494M - Specification for Castings, Nickel and Nickel Alloy
- ASTM A515 / A515M - Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service
- ASTM A516 / A516M - Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
- ASTM A537 / A537M - Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
- ASTM A564 / A564M - Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
- ASTM A672 - Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
- ASTM A675 / A675M - Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
- ASTM A691 - Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
- ASTM A696 - Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components
- ASTM A739 - Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both
- ASTM A742 / A742M - Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
- ASTM A760 / A760M - Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
- ASTM A761 / A761M - Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
- ASTM A762 / A762M - Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
- ASTM A789 / A789M - Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
- ASTM A790 / A790M - Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
- ASTM A796 / A796M - Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
- ASTM A798 / A798M - Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
- ASTM A807 / A807M - Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications
- ASTM A849 - Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
- ASTM A929 / A929M - Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
- ASTM A979 / A979M - Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field
- ASTM A1042 / A1042M - Specification for Composite Corrugated Steel Pipe for Sewers and Drains
- ASTM B16 / B16M - Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines
- ASTM B21 / B21M - Specification for Naval Brass Rod, Bar, and Shapes
- ASTM B32 - Specification for Solder Metal
- ASTM B62 - Specification for Composition Bronze or Ounce Metal Castings
- ASTM B68 - Specification for Seamless Copper Tube, Bright Annealed
- ASTM B75 - Standard Specification for Seamless Copper Tube
- ASTM B88 - Standard Specification for Seamless Copper Water Tube
- ASTM B127 - Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip
- ASTM B143 - Specification for Tin-Bronze and Leaded Tin-Bronze Sand Castings (Withdrawn). Replaced by ASTM B584
- ASTM B147 - Specification for High-Strength Yellow Brass (Manganese Bronze) and Leaded High-Strength Yellow Brass (Leaded Manganese Bronze) Sand Castings (Withdrawn). Replaced by ASTM B584
- ASTM B148 - Specification for Aluminum-Bronze Sand Castings
- ASTM B153 - Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing
- ASTM B160 - Specification for Nickel Rod and Bar
- ASTM B161 - Specification for Nickel Seamless Pipe and Tube
- ASTM B162 - Specification for Nickel Plate, Sheet, and Strip
- ASTM B163 - Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes
- ASTM B164 - Specification for Nickel-Copper Alloy Rod, Bar, and Wire
- ASTM B165 - Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube
- ASTM B166 - Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Rod, Bar, and Wire
- ASTM B167 - Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Seamless Pipe and Tube
- ASTM B168 - Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Plate, Sheet, and Strip
- ASTM B211 - Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire
- ASTM B280 - Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
- ASTM B306 - Specification for Copper Drainage Tube (DWV)
- ASTM B333 - Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip
- ASTM B335 - Specification for Nickel-Molybdenum Alloy Rod
- ASTM B351 / B351M - Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars, Rod, and Wire for Nuclear Application
- ASTM B407 - Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube
- ASTM B408 - Specification for Nickel-Iron-Chromium Alloy Rod and Bar
- ASTM B409 - Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip
- ASTM B423 - Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and N08221)* Seamless Pipe and Tube
- ASTM B424 - Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221)* Plate, Sheet, and Strip
- ASTM B425 - Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221) Rod and Bar
- ASTM B434 - Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, UNS N10242)* Plate, Sheet, and Strip
- ASTM B435 - Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip
- ASTM B443 - Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219)* Plate, Sheet, and Strip
- ASTM B446 - Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650)* Rod and Bar
- ASTM B447 - Specification for Welded Copper Tube
- ASTM B462 - Specification for Forged or Rolled UNS N06030, N06022, N06035, N06200, N06059, N06686, N08020, N08024, N08026, N08367, N10276, N10665, N10675, N10629, N08031, N06045, N06025, & R20033 Alloy Pipe Flanges, Forged Fitting, & Values & Parts for Corrosive
- ASTM B463 - Specification for UNS N08020, UNS N08026, and UNS N08024 Alloy Plate, Sheet, and Strip
- ASTM B464 - Specification for Welded UNS N08020, N08024, and N08026 Alloy Pipe
- ASTM B468 - Specification for Welded UNS N08020, N08024, and N08026 Alloy Tubes
- ASTM B473 - Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire
- ASTM B494 / B494M - Specification for Primary Zirconium
- ASTM B511 - Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes
- ASTM B535 - Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe and Tube
- ASTM B536 - Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Plate, Sheet, and Strip
- ASTM B564 - Specification for Nickel Alloy Forgings
- ASTM B572 - Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Rod
- ASTM B573 - Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, N10242)* Rod
- ASTM B574 - Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Rod
- ASTM B575 - Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten Alloy Plate, Sheet, and Strip
- ASTM B577 - Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper
- ASTM B581 - Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod
- ASTM B582 - Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip
- ASTM B584 - Specification for Copper Alloy Sand Castings for General Applications
- ASTM B599 - Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip
- ASTM B601 - Classification for Temper Designations for Copper and Copper Alloys--Wrought and Cast
- ASTM B620 - Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Plate, Sheet, and Strip
- ASTM B621 - Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod
- ASTM B622 - Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube
- ASTM B625 - Specification for UNS N08925, UNS N08031, UNS N08932, UNS N08926, UNS N08354, and UNS R20033 Plate, Sheet, and Strip
- ASTM B640 - Specification for Welded Copper and Copper Alloy Tube for Air Conditioning and Refrigeration Service
- ASTM B649 - Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire
- ASTM B662 - Specification for Silver-Molybdenum Electrical Contact Material
- ASTM B672 - Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar and Wire
- ASTM B677 - Specification for UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe and Tube
- ASTM B698 - Standard Classification for Seamless Copper and Copper Alloy Plumbing Pipe and Tube
- ASTM B813 - Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube
- ASTM B819 - Standard Specification for Seamless Copper Tube for Medical Gas Systems
- ASTM B828 - Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings
- ASTM B837 - Standard Specification for Seamless Copper Tube for Natural Gas and Liquefied Petroleum (LP) Gas Fuel Distribution Systems
- ASTM C361 - Specification for Reinforced Concrete Low-Head Pressure Pipe
- ASTM D883 - Standard Terminology Relating to Plastics
- ASTM D907 - Standard Terminology of Adhesives
- ASTM D1056 - Specification for Flexible Cellular Materials—Sponge or Expanded Rubber
- ASTM D1248 - Specification for Polyethylene Plastics Extrusion Materials For Wire and Cable
- ASTM D1527 - Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80
- ASTM D1599 - Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
- ASTM D1600 - Standard Terminology for Abbreviated Terms Relating to Plastics
- ASTM D1784 - Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
- ASTM D1785 - Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120
- ASTM D2104 - Standard Specification for Polyethylene (PE) Plastic Pipe, Schedule 40
- ASTM D2241 - Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
- ASTM D2513 - Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
- ASTM D2846 / D2846M - Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
- ASTM D3517 - Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
- ASTM D3350 - Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
- ASTM D4161 - Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals
- ASTM E3 - Guide for Preparation of Metallographic Specimens
- ASTM E255 - Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition
- ASTM E527 - Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
- ASTM F412 - Standard Terminology Relating to Plastic Piping Systems
- ASTM F439 - Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
- ASTM F441 / F441M - Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
- ASTM F449 - Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control
- ASTM F714 - Standard Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter
- ASTM F1335 - Standard Specification for Pressure-Rated Composite Pipe and Fittings for Elevated Temperature Service
- ASTM F1488 - Standard Specification for Coextruded Composite Pipe
Pages in category "ASTM Codes"
The following 200 pages are in this category, out of 212 total.
(previous 200) (next 200)next 200)