Category:AWWA Codes

From Piping Designer


Contents

Codes and Sections

Groundwater and Wells

Filtration

Softening

Disinfection Chemicals

Coagulation

Scale and Corrosion Control

Taste and Odor Control

Prophylaxis

Ductile-Iron Pipe and Fittings

  • AWWA C104 - Cement Mortar Lining for Ductile-Iron Pipe and Fittings
  • AWWA C105 - Polyethylene Encasement for Ductile-Iron Pipe Systems
  • AWWA C110 - Ductile-Iron and Gray-Iron Fittings
  • AWWA C111 - Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings
  • AWWA C115 - Flanged Ductile-Iron Pipe With Ductile-Iron or Gray-Iron Threaded Flanges
  • AWWA C116 - Protective Fusion-Bonded Epoxy Coatings for the Interior and Exterior Surfaces of Ductile-Iron and Gray-Iron Fittings for Water Supply Service
  • AWWA C150 - Thickness Design of Ductile-Iron Pipe
  • AWWA C151 - Ductile-Iron Pipe, Centrifugally Cast, for Water
  • AWWA C153 - Ductile-Iron Compact Fittings for Water Service

Steel Pipe

  • AWWA C200 - Steel Water Pipe - 6 In. (150 mm) and Larger
  • AWWA C203 - Coal-Tar Protective Coatings and Linings for Steel Water Pipelines - Enamel and Tape - Hot-Applied
  • AWWA C205 - Cement Mortar Protective Lining and Coating for Steel Water Pipe - 4 In. (100 mm) and Larger - Shop Applied
  • AWWA C206 - Field Welding of Steel Water Pipe
  • AWWA C207 - Steel Pipe Flanges for Waterworks Service - Sizes 4 In. Through 144 In. (100 mm Through 3,600 mm)
  • AWWA C208 - Dimensions for Fabricated Steel Water Pipe Fittings
  • AWWA C209 - Cold-Applied Tape Coatings for the Exterior of Special Sections, Connections, and Fittings for Steel Water Pipelines
  • AWWA C210 - Liquid-Epoxy Coating Systems for the Interior and Exterior of Steel Water Pipelines
  • AWWA C213 - Fusion-Bonded Epoxy Coating for the Interior and Exterior of Steel Water Pipelines
  • AWWA C214 - Tape Coating Systems for the Exterior of Steel Water Pipelines
  • AWWA C215 - Extruded Polyolefin Coatings for the Exterior of Steel Water Pipelines
  • AWWA C216 - Heat-Shrinkable Cross-Linked Polyolefin Coatings for the Exterior of Special Sections, Connections, and Fittings for Steel Water Pipelines
  • AWWA C217 - Petrolatum and Petroleum Wax Tape Coatings for the Exterior of Connections and Fittings for Steel Water Pipelines
  • AWWA C218 - Liquid Coating Systems for the Exterior of Aboveground Steel Water Pipelines and Fittings
  • AWWA C219 - Bolted, Sleeve-Type Couplings for Plain-End Pipe
  • AWWA C220 - Stainless-Steel Pipe, 1/2 In. (13 mm) and Larger
  • AWWA C221 - Fabricated Steel Mechanical Slip-Type Expansion Joints
  • AWWA C222 - Polyurethane Coatings for the Interior and Exterior of Steel Water Pipe and Fittings
  • AWWA C223 - Fabricated Steel and Stainless-Steel Tapping Sleeves
  • AWWA C224 - Nylon-11-Based Polyamide Coating System for the Interior and Exterior of Steel Water Pipe, Connections, Fittings, and Special Sections
  • AWWA C225 - Fused Polyolefin Coating Systems for the Exterior of Steel Water Pipelines
  • AWWA C226 - Stainless-Steel Fittings for Waterworks Service, Sizes 1/2 In. Through 72 In. (13 mm Through 1,800 mm)
  • AWWA C227 - Bolted, Split-Sleeve Restrained and Nonrestrained Couplings for Plain-End Pipe
  • AWWA C228 - Stainless-Steel Pipe Flanges for Water Service - Sizes 2 In. Through 72 In. (50 mm Through 1,800 mm)
  • AWWA C229 - Fusion-Bonded Polyethylene Coating for the Exterior of Steel Water Pipelines

Concrete Pipe

  • AWWA C300 - Reinforced Concrete Pressure Pipe, Steel-Cylinder Type
  • AWWA C301 - Prestressed Concrete Pressure Pipe, Steel-Cylinder Type
  • AWWA C302 - Reinforced Concrete Pressure Pipe, Noncylinder Type
  • AWWA C303 - Concrete Pressure Pipe, Bar-Wrapped, Steel-Cylinder Type
  • AWWA C304 - Design of Prestressed Concrete Cylinder Pipe

Valves and Hydrants

  • AWWA C500 - Metal-Seated Gate Valves for Water Supply Service
  • AWWA C502 - Dry-Barrel Fire Hydrants
  • AWWA C503 - Wet-Barrel Fire Hydrants
  • AWWA C504 - Rubber-Seated Butterfly Valves
  • AWWA C507 - Ball Valves, 6 In. Through 48 In. (150 mm Through 1,200 mm)
  • AWWA C508 - Swing-Check Valves for Waterworks Service, 2-In. Through 24-In. (50-mm Through 600-mm) NPS
  • AWWA C509 - Resilient-Seated Gate Valves for Water Supply Service
  • AWWA C510 - Double Check Valve Backflow Prevention Assembly
  • AWWA C511 - Reduced-Pressure Principle Backflow Prevention Assembly
  • AWWA C512 - Air-Release, Air/Vacuum, and Combination Air Valves for Waterworks Service
  • AWWA C513 - Open-Channel, Fabricated-Metal Slide Gates and Open-Channel, Fabricated-Metal Weir Gates
  • AWWA C515 - Reduced-Wall, Resilient-Seated Gate Valves for Water Supply Service
  • AWWA C517 - Resilient-Seated Cast-Iron Eccentric Plug Valves
  • AWWA C518 - Dual-Disc Swing-Check Valves for Waterworks Service
  • AWWA C530 - Pilot-Operated Control Valves
  • AWWA C540 - Power-Actuating Devices for Valves and Slide Gates
  • AWWA C550 - Protective Interior Coatings for Valves and Hydrants
  • AWWA C560 - Cast-Iron Slide Gates
  • AWWA C561 - Fabricated Stainless Steel Slide Gates
  • AWWA C563 - Fabricated Composite Slide Gates

Pipe Installation

  • AWWA C600 - Installation of Ductile-Iron Water Mains and Their Appurtenances
  • AWWA C602 - Cement Mortar Lining of Water Pipelines in Place - 4 In. (100 mm) and Larger
  • AWWA C604 - Installation of Steel Water Pipe - 4 In. (100 mm) and Larger
  • AWWA C605 - Underground Installation of Polyvinyl Chloride (PVC) Pressure Pipe and Fittings for Water
  • AWWA C606 - Grooved and Shouldered Joints
  • AWWA C620 - Spray-Applied In-Place Epoxy Lining of Water Pipelines, 3 In. (75 mm) and Larger

Disinfection of Facilities

Meters

  • AWWA C700 - Cold-Water Meters - Displacement Type, Bronze Main Case
  • AWWA C701 - Cold-Water Meters - Turbine Type, for Customer Service
  • AWWA C702 - Cold-Water Meters - Compound Type
  • AWWA C703 - Cold-Water Meters - Fire Service Type
  • AWWA C704 - Propeller-Type Meters for Waterworks Applications
  • AWWA C706 - Direct-Reading, Remote-Registration Systems for Cold-Water Meters
  • AWWA C707 - Encoder-Type Remote-Registration Systems for Cold-Water Meters
  • AWWA C708 - Cold-Water Meters - Multijet Type
  • AWWA C710 - Cold-Water Meters - Displacement Type, Plastic Main Case
  • AWWA C712 - Cold-Water Meters - Singlejet Type
  • AWWA C713 - Cold-Water Meters - Fluidic-Oscillator Type
  • AWWA C750 - Transit-Time Flowmeters in Full Closed Conduits

Service Lines

  • AWWA C800 - Underground Service Line Valves and Fittings

Plastic Pipe

  • AWWA C900 - Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Fittings, 4 In. Through 12 In. (100 mm Through 300 mm), for Water Transmission and Distribution
  • AWWA C901 - Polyethylene (PE) Pressure Pipe and Tubing, 1/2 In. (13 mm) Through 3 In. (76 mm), for Water Service
  • AWWA C903 - Polyethylene-Aluminum-Polyethylene & Cross-linked Polyethylene-Aluminum-Cross-linked Polyethylene Composite Pressure Pipes, 1/2 In. (12 mm) Through 2 In. (50 mm), for Water Service
  • AWWA C904 - Cross-Linked Polyethylene (PEX) Pressure Pipe, 1/2 In. (12 mm) hrough 3 In. (76 mm), for Water Service
  • AWWA C905 - Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Fittings, 14 In. Through 48 In. (350 mm Through 1,200 mm), for Water Transmission and Distribution
  • AWWA C906 - Polyethylene (PE) Pressure Pipe and Fittings, 4 In. (100 mm) Through 63 In. (1,600 mm), for Water Distribution and Transmission
  • AWWA C907 - Injection-Molded Polyvinyl Chloride (PVC) Pressure Fittings, 4 In. Through 12 In. (100 mm Through 300 mm), for Water Distribution
  • AWWA C909 - Molecularly Oriented Polyvinyl Chloride (PVCO) Pressure Pipe, 4 In. Through 24 In. (100 mm Through 600 mm), for Water Distribution
  • AWWA C950 - Fiberglass Pressure Pipe

Storage

  • AWWA D100 - Welded Carbon Steel Tanks for Water Storage
  • AWWA D102 - Coating Steel Water-Storage Tanks
  • AWWA D103 - Factory-Coated Bolted Steel Tanks for Water Storage
  • AWWA D104 - Automatically Controlled, Impressed-Current Cathodic Protection for the Interior of Steel Water Tanks
  • AWWA D110 - Wire- and Strand-Wound, Circular, Prestressed Concrete Water Tanks
  • AWWA D115 - Tendon-Prestressed Concrete Water Tanks
  • AWWA D120 - Thermosetting Fiberglass-Reinforced Plastic Tanks
  • AWWA D130 - Flexible-Membrane Materials for Potable Water Applications

Pumps

  • AWWA E102 - Submersible Vertical Turbine Pumps
  • AWWA E103 - Horizontal and Vertical Line-Shaft Pumps

Plant Equipment

  • AWWA F101 - Contact-Molded, Fiberglass-Reinforced Plastic Wash-Water Troughs and Launders
  • AWWA F102 - Matched-Die-Molded, Fiberglass-Reinforced Plastic Weir Plates, Scum Baffles, and Mounting Brackets

Utility Management

  • AWWA G100 - Water Treatment Plant Operation and Management
  • AWWA G200 - Distribution Systems Operation and Management
  • AWWA G300 - Source Water Protection
  • AWWA G430 - Security Practices for Operation and Management

Manuals

  • AWWA M2 - Instrumentation and Control
  • AWWA M9 - Concrete Pressure Pipe
  • AWWA M11 - Steel Pipe: A Guide for Design and Installation
  • AWWA M17 - Installation, Field Testing, and Maintenance of Fire Hydrants
  • AWWA M31 - Distribution System Requirements for Fire Protection
  • AWWA M41 - Ductile-Iron Pipe and Fittings
  • AWWA M42 - Steel Water Storage Tanks
  • AWWA M44 - Distribution Valves: Selection, Installation, Field Testing, and Maintenance
  • AWWA M45 - Fiberglass Pipe Design
  • AWWA M49 - Butterfly Valves: Torque, Head Loss & Cavitation Analysis
  • AWWA M51 - Air Release, Air/Vacuum Valves & Combination Air Valves
Retrieved from "http://www.piping-designer.com/Category:AWWA_Codes"
Top of Page
© 2006-2012 Piping Designer, LLC