Category:NACE Codes

From Piping-Designer

• National Association of Corrosion Engineers

Contents 1 Codes and Sections 1.1 Standard Practices 1.2 Recommended Practice 1.3 Test Method 1.4 Material Requirements 1.5 Present Requirements 1.6 Visual

Codes and Sections

Standard Practices

• NACE SP0106 - Control of Internal Corrosion in Steel Pipelines and Piping Systems
• NACE SP0107 - Electrochemical Realkalization and Chloride Extraction for Reinforced Concrete
• NACE SP0108 - Corrosion Control of Offshore Structures by Protective Coatings
• NACE SP0169 - Control of External Corrosion on Underground or Submerged Metallic Piping Systems
• NACE SP0176 - Corrosion Control of Submerged Areas of Permanently Installed Steel Offshore Structures Associated with Petroleum Production
• NACE SP0177 - Mitigation of Alternating Current and Lightning Effects on Metallic Structures and Corrosion Control Systems
• NACE SP0178 - Design, Fabrication, and Surface Finish Practices for Tanks and Vessels to Be Lined for Immersion Service
• NACE SP0181 - Liquid-Applied Internal Protective Coatings for Oilfield Production Equipment
• NACE SP0185 - Extruded Polyolefin Resin Coating Systems with Soft Adhesives for Underground or Submerged Pipe
• NACE SP0186 - Application of Cathodic Protection for External Surfaces of Steel Well Casings
• NACE SP0188 - Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates
• NACE SP0191 - Application of Internal Plastic Coatings for Oilfield Tubular Goods and Accessories
• NACE SP0195 - Corrosion Control of Sucker Rods by Chemical Treatment
• NACE SP0199 - (Formerly RP0199) Installation of Stainless Chromium-Nickel Steel and Nickel-Alloy Roll-Bonded and Explosion-Bonded Clad Plate in Air Pollution Control Equipment
• NACE SP0200 - Steel-Cased Pipeline Practices
• NACE SP0206 - Internal Corrosion Direct Assessm
• NACE SP0207 - Performing Close-Interval Potential Surveys and DC Surface Potential Gradient Surveys on Buried or Submerged Metallic Pipelines
• NACE SP0273 - Handling and Proper Usage of Inhibited Oilfield Acids
• NACE SP0286 - Electrical Isolation of Cathodically Protected Pipelines
• NACE SP0290 - Impressed Current Cathodic Protection of Reinforcing Steel in Atmospherically Exposed Concrete Structures
• NACE SP0294 - Design, Fabrication, and Inspection of Tanks for the Storage of Concentrated Sulfuric Acid and Oleum at Ambient Temperatures
• NACE SP0295 - Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars
• NACE SP0298 - Sheet Rubber Linings for Abrasion and Corrosion Service
• NACE SP0302 - Selection and Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars in Molten Sulfur Service
• NACE SP0386 - Application of a Coating System to Interior Surfaces of Covered Steel Hopper Railcars in Plastic, Food, and
• NACE SP0387 - Metallurgical and Inspection Requirements for Cast Galvanic Anodes for Offshore Applications
• NACE SP0388 - Impressed Current Cathodic Protection of Internal Submerged Surfaces
• NACE SP0398 - Recommendations for Training and Qualifying Personnel as Railcar Coating and Lining Inspectors
• NACE SP0403 - Avoiding Caustic Stress Corrosion Cracking of Carbon Steel Refinery Equipment and Piping
• NACE SP0407 - Format, Content, and Guidelines for Developing a Materials Selection Diagram
• NACE SP0487 - Considerations in the Selection and Evaluation of Rust Preventives and Vapor Corrosion Inhibitors for Interim (Temporary) Corrosion Protection
• NACE SP0490 - Holiday Detection of Fusion-Bonded Epoxy External Pipeline Coating of 250 to 760 um (10 to 30 mil)
• NACE SP0492 - Metallurgical and Inspection Requirements for Offshore Pipeline Bracelet Anodes
• NACE SP0499 - Corrosion Control and Monitoring in Seawater Injection Systems
• NACE SP0502 - Pipeline External Corrosion Direct Assessment Methodology
• NACE SP0507 - External Corrosion Direct Assessment (ECDA) Integrity Data Exchange (IDX) Format
• NACE SP0575 - Internal Cathodic Protection (CP) Systems in Oil-Treating Vessels
• NACE SP0590 - Prevention, Detection, and Correction of Deaerator Cracking
• NACE SP0592 - Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars in Concentrated (90 to 98%) Sulfuric Acid Service
• NACE SP0892 - Coatings and Linings over Concrete for Chemical Immersion and Containment Service
• NACE SP0607 - Petroleum and natural gas industries—Cathodic protection of pipeline

Recommended Practice

• NACE RP0100 - Cathodic Protection of Prestressed Concrete Cylinder Pipelines
• NACE RP0102 - In-Line Inspection of Pipelines
• NACE RP0104 - The Use of Coupons for Cathodic Protection Monitoring Applications
• NACE RP0105 - Liquid-Epoxy Coatings for External Repair, Rehabilitation, and Weld Joints on Buried Steel Pipelines
• NACE RP0170 - Protection of Austenitic Stainless Steels and Other Austenitic Alloys from Polythionic Acid Stress Corrosion Cracking During Shutdown of Refinery Equipment
• NACE RP0180 - Cathodic Protection of Pulp and Paper Mill Effluent Clarifiers
• NACE RP0187 - Design Considerations for Corrosion Control of Reinforcing Steel in Concrete
• NACE RP0189 - On-Line Monitoring of Cooling Waters
• NACE RP0192 - Monitoring Corrosion in Oil and Gas Production with Iron Counts
• NACE RP0193 - External Cathodic Protection of On-Grade Carbon Steel Storage Tank Bottoms
• NACE RP0196 - Galvanic Anode Cathodic Protection of Internal Submerged Surfaces of Steel Water Storage Tanks
• NACE RP0197 - Standard Format for Computerized Electrochemical Polarization Curve Data Files
• NACE RP0198 - The Control of Corrosion Under Thermal Insulation and Fireproofing Materials—A Systems Approach
• NACE RP0199 - Installation of Stainless Chromium-Nickel Steel and Nickel-Alloy Roll-Bonded and Explosion-Bonded Clad Plate in Air Pollution Control Equipment
• NACE RP0204 - Stress Corrosion Cracking (SCC) Direct Assessment Methodology
• NACE RP0205 - Recommended Practice for the Design, Fabrication, and Inspection of Tanks for the Storage of Petroleum Refining Alkylation Unit Spent Concentrated Sulfuric Acid at Ambient Temperatures
• NACE RP0274 - High-Voltage Electrical Inspection of Pipeline Coatings
• NACE RP0281 - Method for Conducting Coating (Paint) Panel Evaluation Testing in
• NACE RP0285 - Corrosion Control of Underground Storage Tank Systems by Cathodic Protection
• NACE RP0287 - Field Measurement of Surface Profile of Abrasive Blast-Cleaned Steel Surfaces Using a Replica Tape
• NACE RP0288 - Inspection of Linings on Steel and Concrete
• NACE RP0291 - Care, Handling, and Installation of Internally Plastic-Coated Oilfield Tubular Goods and Accessories
• NACE RP0292 - Installation of Thin Metallic Wallpaper Lining in Air Pollution Control and Other Process Equipment
• NACE RP0296 - Guidelines for Detection, Repair, and Mitigation of Cracking of Existing Petroleum Refinery Pressure Vessels in Wet H2S Environments
• NACE RP0297 - Maintenance Painting of Electrical Substation Apparatus Including Flow Coating of Transformer Radiators
• NACE RP0300 - Corrosion of metals and alloys-Corrosion and fouling in industrial cooling water systems-Part 1
• NACE RP0303 - Field-Applied Heat-Shrinkable Sleeves for Pipelines: Application, Performance, and Quality Control
• NACE RP0304 - Design, Installation, and Operation of Thermoplastic Liners for Oilfield Pipelines
• NACE RP0375 - Field-Applied Underground Wax Coating Systems for Underground Pipelines: Application, Performance, and Quality Control
• NACE RP0390 - Maintenance and Rehabilitation Considerations for Corrosion Control of Atmospherically Exposed Existing Steel-Reinforced Concrete Structures
• NACE RP0391 - Materials for the Handling and Storage of Commercial Concentrated (90 to 100%) Sulfuric Acid at Ambient Temperatures
• NACE RP0392 - Recovery and Repassivation After Low pH Excursions in Open Rehttp://www.piping-designer.com/pages/wiki/skins/common/images/button_bold.pngcirculating Cooling Water Systems
• NACE RP0394 - Application, Performance, and Quality Control of Plant-Applied, Fusion-Bonded Epoxy External Pipe Coating
• NACE RP0395 - Fusion-Bonded Epoxy Coating of Steel Reinforcing Bars
• NACE RP0399 - Plant-Applied, External Coal Tar Enamel Pipe Coating Systems: Application, Performance, and Quality Control
• NACE RP0402 - Field-Applied Fusion-Bonded Epoxy (FBE) Pipe Coating Systems for Girth Weld Joints: Application, Performance, and Quality Control
• NACE RP0472 - Methods and Controls to Prevent In-Service Environmental Cracking of Carbon Steel Weldments in Corrosive Petroleum Refining Environments
• NACE RP0491 - Worksheet for the Selection of Oilfield Nonmetallic Seal Systems
• NACE RP0495 - Guidelines for Qualifying Personnel as Abrasive Blasters and Coating and Lining Applicators in the Rail Industries
• NACE RP0497 - Field Corrosion Evaluation Using Metallic Test Specimens
• NACE RP0602 - Field-Applied Coal Tar Enamel Pipe Coating Systems: Application, Performance, and Quality Control
• NACE RP0690 - Standard Format for Collection and Compilation of Data for Computerized Material Corrosion Resistance Database Input
• NACE RP0692 - Application of a Coating System to Exterior Surfaces of Steel Rail Cars
• NACE RP0775 - Preparation, Installation, Analysis, and Interpretation of Corrosion Coupons in Oilfield Operations

Test Method

• NACE TM0101 - Measurement Techniques Related to Criteria for Cathodic Protection on Underground or Submerged Metallic Tank Systems
• NACE TM0102 - Measurement of Protective Coating Electrical Conductance on Underground Pipelines
• NACE TM0103 - Laboratory Test Procedures for Evaluation of SOHIC Resistance of Plate Steels Used in Wet H2S Service
• NACE TM0104 - Offshore Platform Ballast Water Tank Coating System Ev
• NACE TM0105 - Test Procedures for Organic-Based Conductive Coating Anodes for Use on Concrete Structures
• NACE TM0106- Detection, Testing, and Evaluation of Microbiologically Influenced Corrosion (MIC) on External Surfaces of Buried Pipelines
• NACE TM0108 - Testing of Catalyzed Titanium Anodes for Use in Soils or Natural Waters
• NACE TM0169 - Laboratory Corrosion Testing of Metals
• NACE TM0172 - Determining Corrosive Properties of Cargoes in Petroleum Product Pipelines
• NACE TM0173 - Methods for Determining Quality of Subsurface Injection Water Using Membrane Filters
• NACE TM0174 - Laboratory Methods for the Evaluation of Protective Coatings and Lining Materials on Metallic Substrates in Immersion Service
• NACE TM0177 - Laboratory Testing of Metals for Resistance to Sulfide Stress Cracking and Stress Corrosion Cracking in H2S Environments
• NACE TM0183 - Evaluation of Internal Plastic Coatings for Corrosion Control of Tubular Goods in an Aqueous Flowing Environment
• NACE TM0185 - Evaluation of Internal Plastic Coatings for Corrosion Control of Tubular Goods by Autoclave Testing
• NACE TM0186 - Holiday Detection of Internal Tubular Coatings of 250 to 760 µm (10 to 30 mils) Dry-Film Thickness
• NACE TM0187 - Evaluating Elastomeric Materials in Sour Gas Environments
• NACE TM0190 - Impressed Current Laboratory Testing of Aluminum Alloy Anodes
• NACE TM0192 - Evaluating Elastomeric Materials in Carbon Dioxide Decompression Environments
• NACE TM0193 - Laboratory Corrosion Testing of Metals in Static Chemical Cleaning Solutions at Temperatures Below 93°C (200°F)
• NACE TM0194 - Field Monitoring of Bacterial Growth in Oil and Gas Systems
• NACE TM0197 - Laboratory Screening Test to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of Barium Sulfate and/or Strontium Sulfate from Solution (for Oil and Gas Production Systems)
• NACE TM0198 - Slow Strain Rate Test Method for Screening Corrosion-Resistant Alloys (CRAs) for Stress Corrosion Cracking in Sour Oilfield Service
• NACE TM0199 - Standard Test Method for Measuring Deposit Mass Loading (Deposit Weight Density) Values for Boiler Tubes by the Glass-Bead-Blasting Technique
• NACE TM0204 - Exterior Protective Coatings for Seawater Immersion Service
• NACE TM0208 - Laboratory Test to Evaluate the Vapor-Inhibiting Ability of Volatile Corrosion Inhibitor Materials for Temporary Protection of Ferrous Metal Surfaces
• NACE TM0284 - Evaluation of Pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking
• NACE TM0286 - Cooling Water Test Unit Incorporating Heat Transfer Surfaces
• NACE TM0294 - Testing of Embeddable Impressed Current Anodes for Use in Cathodic Protection of Atmospherically Exposed Steel-Reinforced Concrete
• NACE TM0296 - Evaluating Elastomeric Materials in Sour Liquid Environments
• NACE TM0297 - Effects of High-Temperature, High-Pressure Carbon Dioxide Decompression on Elastomeric Materials
• NACE TM0298 - Evaluating the Compatibility of FRP Pipe and Tubulars with Oilfield Environments
• NACE TM0304 - Offshore Platform Atmospheric and Splash Zone Maintenance Coating System Evaluation
• NACE TM0374 - Laboratory Screening Tests to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of Calcium Sulfate and Calcium Carbonate from Solution (for Oil and Gas Production Systems)
• NACE TM0384 - Holiday Detection of Internal Tubular Coatings of Less Than 250 µm (10 mils) Dry-Film Thickness
• NACE TM0397 - Screening Tests for Evaluating the Effectiveness of Gypsum Scale Removers
• NACE TM0399 - Standard Test Method for Phosphonate in Brine
• NACE TM0404 - Offshore Platform Atmospheric and Splash Zone New C
• NACE TM0497 - Measurement Techniques Related to Criteria for Cathodic Protection on Underground or Submerged Metallic Piping Systems
• NACE TM0498 - Evaluation of the Carburization of Alloy Tubes Used for Ethylene Manufacture
• NACE TM0499 - Immersion Corrosion Testing of Ceramic Materials

Material Requirements

• NACE MR0103 - Materials Resistant to Sulfide Stress Cracking in Corrosive Petroleum Refining Environments
• NACE MR0174- Selecting Inhibitors for Use as Sucker-Rod Thread Lubricants.
• NACE MR0175 - Petroleum and natural gas industries—Materials for use in H2S-containing environments in oil and gas production
• NACE MR0176 - Metallic Materials for Sucker-Rod Pumps for Corrosive Oilfield Environments

Present Requirements

• NACE No. 1 - White Metal Blast Cleaning
• NACE No. 2 - Near-White Metal Blast Cleaning
• NACE No. 3 - Commercial Blast Cleaning
• NACE No. 4 - Brush-Off Blast Cleaning
• NACE No. 5 - Surface Preparation and Cleaning of Metals by Waterjetting Prior to Recoating
• NACE No. 6 - Surface Preparation of Concrete
• NACE No. 8 - Industrial Blast Cleaning
• NACE No. 10 - Fiberglass-Reinforced Plastic (FRP) Linings Applied to Bottoms of Carbon Steel Aboveground Storage Tanks
• NACE No. 11 - Thin-Film Organic Linings Applied in New Carbon Steel Process Vessels
• NACE No. 12 - Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel
• NACE No. 13 - Industrial Coating and Lining Application Specialist Qualification and Certification

Visual

• NACE VIS 7 - Guide and Visual Reference Photographs for Steel Cleaned by Waterjetting
• NACE VIS 9 - Guide and Reference Photographs for Steel Surfaces Prepared by Wet Abrasive Blast Cleaning

Top of Page