(Redirected from Flange Datasheet)


Related

}}

This is the size differences between a 150 to 2500, 4" weld neck flange.
  • Flange - ASME B16.5 (1/2"-24")
    • Blind Flange: Class 150, Class 300, Class 400, Class 600, Class 900, Class 1500, Class 2500
    • Lap Joint Flange: Class 150, Class 300, Class 400, Class 600, Class 900, Class 1500, Class 2500
    • Socket Flange: Class 150, Class 300, Class 400, Class 600, Class 900, Class 1500, Class 2500
    • Slip-on Flange: Class 150, Class 300, Class 400, Class 600, Class 900, Class 1500, Class 2500
    • Threaded Flange: Class 150, Class 300, Class 400, Class 600, Class 900, Class 1500, Class 2500
    • Weld Neck Flange: Class 150, Class 300, Class 400, Class 600, Class 900, Class 1500, Class 2500
  • Flange - ASME B16.47, Large Diameter (26"-larger)
    • Series A
      • Blind Flange: Class 150, Class 300, Class 400, Class 600, Class 900
      • Weld Neck Flange: Class 150, Class 300, Class 400, Class 600, Class 900
    • Series B
      • Blind Flange: Class 75, Class 150, Class 300, Class 400, Class 600, Class 900
      • Weld Neck Flange: Class 75, Class 150, Class 300, Class 400, Class 600, Class 900
  • Flange - ASME B16.36, Orifice Flange (1/2"-24")
    • Slip-on Flange: Class 300, Class 400, Class 600, Class 900, Class 1500
    • Threaded Flange: Class 300, Class 400, Class 600, Class 900, Class 1500
    • Weld Neck Flange: Class 300, Class 400, Class 600, Class 900, Class 1500, Class 2500
  • Flange - Industry Standard Flange (also called Large Diameter Flange) (26"-larger)
    • Industry Standard Flanges have no national standard code or are they covered by any governing body.
      • Blind Flange: Class 75, Class 125, Class 175, Class 250, Class 350
      • Weld Neck Flange: Class 75, Class 125LW, Class 125, Class 175, Class 250, Class 350
      • Slip-on Flange: Class 75, Class 125LW, Class 125, Class 175, Class 250, Class 350
  • Flange - AWWA Standard Flange
    • AWWA C207-07
      • Steel Ring Flange: Class B, Class D, Class E, Class F
      • Steel Hub Flange: Class D, Class E
      • Blind Flange: Class B, Class D, Class E, Class F
    • AWWA C207-94
      • Steel Ring Flange: Class B, Class D, Class E, Class F
      • Steel Hub Flange: Class D, Class E
      • Blind Flange: Class B, Class D, Class E, Class F

Subcategories

This category has the following 14 subcategories, out of 14 total.

A

B

F

L

O

P

R

S

S cont.

T

W

Pages in category "Flange Datasheet"

The following 134 pages are in this category, out of 134 total.

B

F

F cont.

F cont.

O

P

S

T
Retrieved from "http://www.piping-designer.com/Category:Flange_Datasheet"
Top of Page