Angle of Cut

CUT PIECES.jpg

Find the angle of a fabricated pipe turn, it is the same no matter what the angle.


Angle of Cut: \large%20\ A=\frac{number\ of\ degrees\ of\ the\ turn}{number\ of\ welds\ times\ 2}


Angle of Cut: \large%20\ A=\frac{90^\circ}{3\ x\ 2}=15^\circ

Three welds are required for a 4 piece 90° turn or any other angle.

Layout Cut Lines

CUT PIECES2.jpg
Retrieved from "http://www.piping-designer.com/Length_of_Cut_Pieces_on_a_Curve"
Top of Page