Pipe - HDPE, ANSI DR 17.0, 125 PSI, DIPS (in)

on . Posted in Pipe & Tubing Datasheets

  • ASTM D3350 - Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
  • ASTM F714 - Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
  • HDPE can provide up to 1.5 times the pipe pressure rating for a recurring surge and up to 2.0 times the pipe pressure rating for an occasional surge.
  • HDPE = High-density Polyethylene

 

Pipe - HDPE, ANSI DR 17.0, 125 PSI, DIPS (in)

Pipe Size

(NPS)

Outside Diameter

(DIPS)

Minimum Wall

(in)

Average Inside Diameter

(in)

Approx. Weight

(lbs/ft)

4 4.800 0.282 4.202 1.76
6 6.900 0.406 6.039 3.64
8 9.050 0.532 7.922 6.26
10 11.100 0.653 9.716 9.42
12 13.200 0.776 11.555 13.31
14 15.300 0.900 13.392 17.89
16 17.400 1.024 15.229 23.15
18 19.500 1.147 17.068 29.07
20 21.600 1.271 18.905 35.68
24 25.800 1.518 22.582 50.89
30 32.000 1.882 28.010 78.26
36 38.300 2.253 33.524 112.13
42 44.500 2.618 38.950 151.39

 

Piping Designer Logo 1