Valve - Ball, Reduced Port, ANSI Class 600, CS (in)

on . Posted in Ball Valve Datasheets

  • Dimensions and tolerances in accordance with ANSI/ASME B16.5 for sizes 1/2" to 24".
  • Face to face dimensions per ANSI/ASME B16.10.
  • Gaskets dimensions and tolerances in accordance with ANSI/ASME B16.20.
  • Preparation of buttweld end in accordance with ANSI/ASME B16.25.
  • Valve dimensions and tolerances in accordance with ANSI/ASME B16.34.
  • Valve weight, open height and handwheel diameter are approximate and vary between manufacture's. Contact manufacturer for specific information.
  • Pressure Temperature Rating:
    • Carbon Steel
    • ASTM A216 Grade WCB
    • 285 psi @ -20°F to 100°F

 data flg ball valvedata flg ball valve 1

Valve Size

(in)

Face to Face Dimension (in)Approx. Handle (in)Approx. Weight (lb)
Raised Face

A

Buttweld

A

Ring Joint

A

Height

A1

Length

A2

Raised Face

 

Buttweld

 

Ring Joint

 

1/2 - - - - - - - -
3/4 - - - - - - - -
1 - - - - - - - -
1 1/2 - - - - - - - -
2 11 1/2 11 1/2 11 5/8 8 24 75 - 75
2 1/2 - - - - - - - -
3 14 14 14 1/8 9 40 100 - 100
4 17 17 17 1/8 11 51 200 - 200
6 22 22 22 1/8 * * 360 - 360
8 26 26 26 1/8 * * 690 - 690
10 31 31 31 1/8 * * 1260 - 1260
12 33 33 33 1/8 * * 1880 - 1880
14 - - - - - - - -
16 39 39 39 1/8 * * 3070 - 3070
18 - - - - - - - -
20 - - - - - - - -
24 - - - - - - - -
  • * Manual gear actuators for 6" and above normally come with reduced port.