Back Pressure Valve

on . Posted in Valve

Back pressure valve, abbreviated as BPV, is a control valve that is designed to hold back pressure on a process.  The back pressure is the resistance or pressure exerted against the normal flow of fluid through a valve.  When a valve is in a closed or partially closed position, it creates resistance to the flow of the fluid, and this resistance is referred to as back pressure.

back pressure Valve Index

The amount of back pressure generated by a valve depends on several factors, including the degree to which the valve is closed, the type of valve, and the characteristics of the fluid flowing through the system.  Valves are commonly used in various industries to control the flow of liquids or gases, and understanding and managing back pressure is important for the proper functioning of the system.  This would be desirable to hold a certain level in a vessel or hold a gas pad above a tank.

Excessive back pressure can have several implications

  • Reduced Flow Rates  -  Back pressure can limit the flow of fluid through the valve, affecting the overall flow rates in the system.
  • Increased Energy Consumption  -  Overcoming higher back pressure requires more energy, potentially leading to increased energy consumption in pump systems.
  • Valve Wear  -  Continuous exposure to high back pressure may contribute to increased wear and tear on the valve components.
  • System Efficiency  -  Back pressure can impact the overall efficiency of a fluid system, especially in processes where precise control of flow rates is crucial.

It's important for engineers and system designers to consider and account for back pressure when designing fluid systems, selecting valves, and optimizing system performance.  This involves understanding the characteristics of the fluid, choosing appropriate valve types, and properly sizing and configuring the valves within the system.

Another function of a back pressure control valve would be to hold a centrifugal pump on its curve.  A centrifugal pump will only provide a flow rate based on downstream pressure,  In order to lower the flow rate of the pump, an artificial pressure drop is introduced with a back pressure control valve.  This pressure drop will cause the operating point of the valve to move.  When the valve is used for controlling flow on a pump, it is called a "Flow Control Valve" or FCV on the P&IDs.  It should also be noted that the same functionality can be achieved by using an Adjustable Frequency Drive (or Variable Frequency Drive)  which speeds up or slows down the motor based on flow rate.  Using an AFD will have lower operating costs than a pump with a control valve.

The calculation of valve back pressure involves considering the resistance created by the valve in the fluid flow.  The formula for valve back pressure is often related to the pressure drop across the valve. 

 

Back Pressure Valve formula

\( \Delta P = K \; \frac{ 1 }{ 2 } \; \rho \; v^2  \) 
Symbol English Metric
\( \Delta P \) = pressure drop across the valve \(lbf\;/\;in^2\) \(Pa\)
\( K \) = valve flow coefficient \(dimensionless\)
\( \rho \)   (Greek symbol rho) = density of the fluid \(lbm\;/\;ft^3\) \(kg\;/\;m^3\)
\( v \) = velocity of the fluid \(ft\;/\;sec\) \(m\;/\;s\)

 

It's important to note that this is a simplified formula, and the actual calculation may involve additional factors and considerations based on the specific characteristics of the valve and the fluid being used.  Additionally, the valve coefficient is often provided by the valve manufacturer and is determined experimentally for each type of valve.

Keep in mind that understanding and predicting back pressure accurately may require more detailed fluid dynamics analysis or consulting the valve manufacturer's specifications for detailed performance data.  Engineers typically use empirical data and computational tools to calculate or estimate back pressure in real-world applications.

Piping Designer Logo 1

 

 

 

Tags: Pressure Valve