These flange drawings contain 66 blocks!
Flanges in this category are split up as a single flange and a flange pair.
Most flange packages are \(5.99 each. Dynamic Blocks range from \)9.99 to $19.99.
Single flanges have multiple views, side and end views. These would be useful when doing end of line work or for plot plan or section drawings.
Double flanges have end views only. They include two flanges with a gasket inserted between them. These are already spaced to include the width of the gasket.
Example of the Type of Blocks
|Weld Neck Flanges|
|Single Flange (Inches)||Flange Pair (Inches)||Dynamic Blocks (Inches)|
|ANSI 150||Weld Neck Flange - ANSI 150||Weld Neck Pair - ANSI 150||Dynamic Block - Weld Neck Flange Pair||Dynamic Block - Weld Neck Flange with Blind||Dynamic Block - Weld Neck Flange End View|
|ANSI 300||Weld Neck Flange - ANSI 300||Weld Neck Pair - ANSI 300|
|ANSI 400||Weld Neck Flange - ANSI 400||Weld Neck Pair - ANSI 400|
|ANSI 600||Weld Neck Flange - ANSI 600||Weld Neck Pair - ANSI 600|
|ANSI 900||Weld Neck Flange - ANSI 900||Weld Neck Pair - ANSI 900|
|ANSI 1500||Weld Neck Flange - ANSI 1500||Weld Neck Pair - ANSI 1500|
|ANSI 2500||Weld Neck Flange - ANSI 2500||Weld Neck Pair - ANSI 2500|
Notes for All Drawings
Each drawing package has been created on 'Layer 0' and can be either copied into your working drawing or can be copied into your pallettes. The drawing is saved as a .dwg file and includes four different views:
- Fange Face View, 1" - 20"
- Weld End View, 1" - 20"
- Side View - Double Line, 1" - 20"
- Side View - Single Line, 1" - 12"
Drawing file will work in the following formats:
- AutoCAD 2013/ LT2013
- AutoCAD 2010/ LT2010 (does not include dynamic blocks)
- AutoCAD 2004/ LT2004