Pipe - HDPE, ANSI DR 17.0, 125 PSI, IPS (in)

Pipe - HDPE, ANSI DR 17.0, 125 PSI, IPS (in) ASTM D3350 - Standard Specification for Polyethylene Plastics Pipe and Fittings Materials ASTM F714 - Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter HDPE can provide up to 1.5 times the pipe pressure rating for a recurring surge and up to 2.0 times the pipe pressure rating for an occasional surge. HDPE = High-density Polyethylene
Pipe Size (NPS)	Outside Diameter (in)	Minimum Wall (in)	Average Inside Diameter (in)	Approx. Weight (lbs/ft)
1 1/4	1.660	-	-	-
1 1/2	1.900	-	-	-
2	2.375	0.140	2.078	0.43
3	3.500	0.206	3.063	0.94
4	4.500	0.265	3.938	1.55
6	6.625	0.390	5.798	3.36
8	8.625	0.507	7.550	5.69
10	10.750	0.632	9.410	8.83
12	12.750	0.750	11.160	12.43
14	14.000	0.824	12.253	14.98
16	16.000	0.941	14.005	19.57
18	18.000	1.059	15.755	24.77
20	20.000	1.176	17.507	30.58
22	22.000	1.294	19.257	37.00
24	24.000	1.412	21.007	44.03
26	26.000	1.529	22.759	51.67
28	28.000	1.647	24.508	59.93
30	30.000	1.765	26.258	68.80
32	32.000	1.882	28.010	78.28
34	34.000	2.000	29.760	88.37
36	36.000	2.118	31.510	99.07
42	42.000	2.471	36.761	134.84
48	48.000	2.824	42.013	176.12
54	54.000	3.176	47.266	222.90