Pipe - HDPE, ANSI DR 11.0, 200 PSI, DIPS (in)

on . Posted in Pipe & Tubing Datasheets

  • ASTM D3350 - Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
  • ASTM F714 - Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
  • HDPE can provide up to 1.5 times the pipe pressure rating for a recurring surge and up to 2.0 times the pipe pressure rating for an occasional surge.
  • HDPE = High-density Polyethylene

 

Pipe - HDPE, ANSI DR 11.0, 200 PSI, DIPS (in)

Pipe Size

(in)

Outside Diameter

(in)

Minimum Wall

(in)

Average Inside Diameter

(in)

Approx. Weight

(lbs/ft)

4 4.800 0.436 3.876 2.62
6 6.900 0.627 5.571 5.42
8 9.050 0.823 7.305 9.32
10 11.100 1.009 8.961 14.03
12 13.200 1.200 10.656 19.84
14 15.300 1.391 12.351 26.65
16 17.400 1.582 14.046 34.47
18 19.500 1.773 15.741 43.29
20 21.600 1.964 17.436 53.12
24 25.800 2.345 20.829 75.78
30 32.000 2.909 25.833 116.58
36 38.300 3.482 30.918 167.01
42 44.500 - - -

 

Piping Designer Logo 1