Pipe - HDPE, ANSI DR 9.0, 250 PSI, DIPS (in)

Pipe - HDPE, ANSI DR 9.0, 250 PSI, DIPS (in) ASTM D3350 - Standard Specification for Polyethylene Plastics Pipe and Fittings Materials ASTM F714 - Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter HDPE can provide up to 1.5 times the pipe pressure rating for a recurring surge and up to 2.0 times the pipe pressure rating for an occasional surge. HDPE = High-density Polyethylene
Pipe Size (NPS)	Outside Diameter (DIPS)	Minimum Wall (in)	Average Inside Diameter (in)	Approx. Weight (lbs/ft)
4	4.800	0.533	3.670	3.13
6	6.900	0.767	5.274	6.47
8	9.050	1.006	6.917	11.13
10	11.100	1.233	8.486	16.74
12	13.200	1.467	10.090	23.67
14	15.300	1.700	11.696	31.80
16	17.400	1.933	13.302	41.13
18	19.500	2.167	14.906	51.66
20	21.600	2.400	16.512	63.38
24	25.800	2.867	19.722	90.43
30	32.000	-	-	-
36	38.300	-	-	-
42	44.500	-	-	-

Melting

Annular Volume Capacity of Pipe

Metric Ton