Pipe - HDPE, ANSI DR 7.3, 317 PSI, DIPS (in)

Pipe - HDPE, ANSI DR 7.3, 317 PSI, DIPS (in)

  • ASTM D3350 - Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
  • ASTM F714 - Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
  • HDPE can provide up to 1.5 times the pipe pressure rating for a recurring surge and up to 2.0 times the pipe pressure rating for an occasional surge.
  • HDPE = High-density Polyethylene
Pipe Size

(NPS)

Outside Diameter

(DIPS)

Minimum Wall

(in)

Average Inside Diameter

(in)

Approx. Weight

(lbs/ft)

4 4.800 0.658 3.405 3.74
6 6.900 0.945 4.897 7.73
8 9.050 1.240 6.421 13.29
10 11.100 1.521 7.875 20.00
12 13.200 1.808 9.367 28.28
14 15.300 2.096 10.856 37.99
16 17.400 2.384 12.346 49.13
18 19.500 2.671 13.837 61.71
20 21.600 - - -
24 25.800 - - -
30 32.000 - - -
36 38.300 - - -
42 44.500 - - -

 

Piping Designer Logo 1

Similar Articles

MOD_TAGS_SIMILAR_NO_MATCHING_TAGS