Pipe - HDPE, ANSI DR 21.0, 100 PSI, IPS (in)

Pipe - HDPE, ANSI DR 21.0, 100 PSI, IPS (in) ASTM D3350 - Standard Specification for Polyethylene Plastics Pipe and Fittings Materials ASTM F714 - Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter HDPE can provide up to 1.5 times the pipe pressure rating for a recurring surge and up to 2.0 times the pipe pressure rating for an occasional surge. HDPE = High-density Polyethylene
Pipe Size (in)	Outside Diameter (in)	Minimum Wall (in)	Average Inside Diameter (in)	Approx. Weight (lbs/ft)
1 1/4	1.660	-	-	-
1 1/2	1.900	-	-	-
2	2.375	-	-	-
3	3.500	-	-	-
4	4.500	0.214	4.046	1.27
6	6.625	0.315	5.957	2.75
8	8.625	0.411	7.754	4.66
10	10.750	0.512	9.665	7.24
12	12.750	0.607	11.463	10.19
14	14.000	0.667	12.586	12.28
16	16.000	0.762	14.385	16.04
18	18.000	0.857	16.183	20.30
20	20.000	0.952	17.982	25.07
22	22.000	1.048	19.778	30.33
24	24.000	1.143	21.577	36.10
26	26.000	1.238	23.375	42.36
28	28.000	1.333	25.174	49.13
30	30.000	1.429	26.971	56.40
32	32.000	1.524	28.769	64.17
34	34.000	1.619	30.568	72.44
36	36.000	1.714	32.366	81.21
42	42.000	2.000	37.760	110.54
48	48.000	2.286	43.154	144.38
54	54.000	2.571	48.549	182.73