Pipe - HDPE, ANSI DR 21.0, 100 PSI, DIPS (in)

Pipe - HDPE, ANSI DR 21.0, 100 PSI, DIPS (in) ASTM D3350 - Standard Specification for Polyethylene Plastics Pipe and Fittings Materials ASTM F714 - Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter HDPE can provide up to 1.5 times the pipe pressure rating for a recurring surge and up to 2.0 times the pipe pressure rating for an occasional surge. HDPE = High-density Polyethylene
Pipe Size (NPS)	Outside Diameter (DIPS)	Minimum Wall (in)	Average Inside Diameter (in)	Approx. Weight (lbs/ft)
4	4.800	0.229	4.315	1.45
6	6.900	0.329	6.203	2.99
8	9.050	0.431	8.136	5.13
10	11.100	0.529	9.979	7.73
12	13.200	0.629	11.867	10.93
14	15.300	0.729	13.755	14.68
16	17.400	0.829	15.643	18.98
18	19.500	0.929	17.531	23.84
20	21.600	1.029	19.419	29.25
24	25.800	1.229	23.195	41.73
30	32.000	1.524	28.769	64.18
36	38.300	1.824	34.433	91.93
42	44.500	2.119	40.008	124.09