Valve - Ball, Reduced Port, ANSI Class 1500, CS (in)

on . Posted in Ball Valve Datasheets

  • Dimensions and tolerances in accordance with ANSI/ASME B16.5 for sizes 1/2" to 24".
  • Face to face dimensions per ANSI/ASME B16.10.
  • Gaskets dimensions and tolerances in accordance with ANSI/ASME B16.20.
  • Preparation of buttweld end in accordance with ANSI/ASME B16.25.
  • Valve dimensions and tolerances in accordance with ANSI/ASME B16.34.
  • Valve weight, open height and handwheel diameter are approximate and vary between manufacture's. Contact manufacturer for specific information.
  • Pressure Temperature Rating:
    • Carbon Steel
    • ASTM A216 Grade WCB
    • 285 psi @ -20°F to 100°F

 data flg ball valvedata flg ball valve 1

Valve Size

(in)

Face to Face Dimension (in)Approx. Handle (in)Approx. Weight (lb)
Raised Face

A

Buttweld

A

Ring Joint

A

Height

A1

Length

A2

Raised Face

 

Buttweld

 

Ring Joint

 

1/2 - - - - - - - -
3/4 - - - - - - - -
1 - - - - - - - -
1 1/2 - - - - - - - -
2 14 1/2 14 1/2 14 5/8 8 24 120 - 120
2 1/2 - - - - - - - -
3 18 1/2 18 1/2 18 5/8 9 40 165 - 165
4 21 1/2 21 1/2 21 5/8 11 51 290 - 290
6 27 3/4 27 3/4 28 * * 600 - 600
8 32 3/4 32 3/4 33 1/8 * * 1360 - 1360
10 39 39 31 3/8 * * 2700 - 2700
12 44 1/2 44 1/2 45 1/8 * * 4200 - 4200
14 - - - - - - - -
16 - - - - - - - -
18 - - - - - - - -
20 - - - - - - - -
24 - - - - - - - -
  • * Manual gear actuators for 6" and above normally come with reduced port.