Casing Vapor Recovery

on . Posted in Pipe

Casing vapor recovery, abbreviated as CVR, is a process used in the oil and gas industry to capture and control the emissions of volatile organic compounds (VOCs) and other hydrocarbon vapors that are released during the drilling, completion, and production of oil and gas wells.  The term "casing" in casing vapor recovery refers to the steel pipe casing that surrounds the wellbore.

how casing vapor recovery typically works

  • Wellhead Equipment  -  When drilling or producing oil and gas, various wellhead equipment is used to extract hydrocarbons from the subsurface reservoirs.  This equipment includes wellheads, valves, and other components.
  • Vapor Release  -  During these operations, hydrocarbon vapors, which can include methane, ethane, propane, and other volatile compounds, can escape into the atmosphere.  These emissions are not only a source of air pollution but also represent a loss of valuable resources.
  • Casing Vapor Recovery System  -  To capture these vapors and prevent their release into the atmosphere, a casing vapor recovery system is installed.  This system typically includes a network of pipes, valves, and equipment designed to collect and control the emissions.
  • Vapor Collection  -  The casing vapor recovery system is connected to the wellhead equipment, and it collects the hydrocarbon vapors as they are released.  The vapors are then transported through the recovery system.
  • Compression and Processing  -  Once collected, the hydrocarbon vapors may be compressed to increase their pressure and transported to a processing unit.  In the processing unit, the recovered vapors can be separated, purified, and returned to the production stream as valuable hydrocarbon products.
  • Emission Reduction  -  By capturing and processing the hydrocarbon vapors, casing vapor recovery systems significantly reduce the emissions of VOCs and other air pollutants associated with oil and gas operations.

Casing vapor recovery is an important environmental and economic practice in the oil and gas industry.  It helps operators comply with environmental regulations, reduces greenhouse gas emissions, and recovers valuable hydrocarbon resources that would otherwise be lost to the atmosphere.  Additionally, it can improve air quality and minimize the environmental impact of oil and gas production operations.

Casing Vapor Recovery Systems

Casing vapor recovery systems typically consist of several key components designed to capture, control, and process hydrocarbon vapors released during oil and gas drilling, completion, and production.  The specific components may vary depending on the design and requirements of the system, but here are the primary components commonly found in a casing vapor recovery system:

  • Vapor Recovery Units (VRU)  -  VRUs are the heart of the casing vapor recovery system.  They are responsible for capturing, compressing, and processing the hydrocarbon vapors.  VRUs can include various sub-components such as compressors, separators, and control systems.
  • Casing Heads  -  Casing heads are components installed at the wellhead, which provide the connection point for the vapor recovery system.  They allow the vapors to be collected from the wellhead equipment.
  • Vapor Collection Lines  -  These are pipes and conduits that transport the hydrocarbon vapors from the wellhead to the vapor recovery unit. They may include valves and fittings for control and isolation.
  • Knockout Drums  -  Knockout drums are vessels designed to remove any liquid droplets or condensates from the vapor stream before it enters the vapor recovery unit.  This helps protect the compressor and other equipment from damage.
  • Compressors  -  Compressors are used to increase the pressure of the recovered vapor stream, making it easier to transport and process.  They are typically centrifugal or reciprocating compressors.
  • Separators  -  Separators are used to separate the recovered vapors into their constituent components, such as methane, ethane, propane, and heavier hydrocarbons.  This separation allows for the proper handling and processing of each component.
  • Control Systems  -  Control systems include sensors, valves, and instrumentation to monitor and regulate the flow of vapor and ensure the system operates efficiently.  They may be automated and linked to safety shutdown systems.
  • Storage Tanks  -  In some cases, recovered hydrocarbon vapors are stored in tanks before being transported for further processing or sale.  These tanks are designed to safely store the captured vapors until they can be processed or transported.
  • Flare or Combustion Equipment  -  In situations where it is not feasible to recover and process all of the captured vapors, some systems include flare stacks or combustion equipment to burn off excess hydrocarbons in a controlled manner, minimizing emissions to the atmosphere.
  • Pipelines or Transport Systems  -  Once the recovered vapors are processed and separated, they may be transported via pipelines, trucks, or other means to their final destination, which could include distribution to natural gas pipelines or processing facilities.

Casing vapor recovery systems are designed to minimize emissions, recover valuable hydrocarbon resources, and ensure compliance with environmental regulations.  The specific configuration and components of a system can vary depending on factors such as well location, production volume, and regulatory requirements.

Piping Designer Logo 1

Tags: Vapor Drilling