Weldolet - Reducing and Flat, ANSI Sch 160/XXS, FCS (in)
- Dimensions and tolerances in accordance with ANSI/ASME B16.9, ANSI/ASME B16.25 and MSS SP-97.
- Specifications for carbon steel forgings in accordance with ASTM A105.
- This is a buttweld connection used for making 90 degree branching from the main run of pipe.
- Flat Weldolets are used on welding caps, elliptical heads and flat surfaces.
- Each outlet size is available to fit any run curvature.
- Outlet combinations 4" and less fit a number of run pipe sizes, and fittings are marked accordingly.
- For dimension L3, see center of run to face of fitting.
Outlet Size (NPS) | A | B | C | Approx. Weight (lb) |
---|---|---|---|---|
1/2 | 1 1/8 | 1 3/8 | 9/16 | 0.25 |
3/4 | 1 1/4 | 1 3/4 | 3/4 | 0.70 |
1 | 1 1/2 | 2 | 1 | 0.85 |
1 1/4 | 1 3/4 | 2 7/16 | 1 5/16 | 1.25 |
1 1/2 | 2 | 2 3/4 | 1 1/2 | 1.75 |
2 | 2 3/16 | 3 3/16 | 1 11/16 | 2.15 |
2 1/2 | 2 7/16 | 3 13/16 | 2 1/8 | 3.40 |
3 | 2 7/8 | 4 3/4 | 2 7/8 | 6.30 |
4 | 3 5/16 | 6 | 3 7/8 | 10.50 |
5 | 3 11/16 | 7 3/8 | 4 13/16 | 14.25 |
6 | 4 1/8 | 8 11/16 | 5 3/4 | 28.00 |
For dimensions below see Heavy Wall Weldolet | ||||
8 | HW | HW | HW | HW |
10 | HW | HW | HW | HW |
12 | HW | HW | HW | HW |
14 | HW | HW | HW | HW |
16 | HW | HW | HW | HW |
18 | HW | HW | HW | HW |
24 | HW | HW | HW | HW |