Pipe - HDPE, ANSI DR 17.0, 125 PSI, IPS (in)

on . Posted in Pipe & Tubing Datasheets

  • ASTM D3350 - Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
  • ASTM F714 - Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
  • HDPE can provide up to 1.5 times the pipe pressure rating for a recurring surge and up to 2.0 times the pipe pressure rating for an occasional surge.
  • HDPE = High-density Polyethylene

 

Pipe - HDPE, ANSI DR 17.0, 125 PSI, IPS (in)

Pipe Size

(NPS)

Outside Diameter

(in)

Minimum Wall

(in)

Average Inside Diameter
(in)
Approx. Weight

(lbs/ft)

1 1/4 1.660 - - -
1 1/2 1.900 - - -
2 2.375 0.140 2.078 0.43
3 3.500 0.206 3.063 0.94
4 4.500 0.265 3.938 1.55
6 6.625 0.390 5.798 3.36
8 8.625 0.507 7.550 5.69
10 10.750 0.632 9.410 8.83
12 12.750 0.750 11.160 12.43
14 14.000 0.824 12.253 14.98
16 16.000 0.941 14.005 19.57
18 18.000 1.059 15.755 24.77
20 20.000 1.176 17.507 30.58
22 22.000 1.294 19.257 37.00
24 24.000 1.412 21.007 44.03
26 26.000 1.529 22.759 51.67
28 28.000 1.647 24.508 59.93
30 30.000 1.765 26.258 68.80
32 32.000 1.882 28.010 78.28
34 34.000 2.000 29.760 88.37
36 36.000 2.118 31.510 99.07
42 42.000 2.471 36.761 134.84
48 48.000 2.824 42.013 176.12
54 54.000 3.176 47.266 222.90

 

Piping Designer Logo 1