Dynamic Blocks - Gate Valve, Wedge with WNF
This Drawing Package contains blocks for wedge gate valves at different ANSI Classes. This drawing package contains 21 dynamic blocks with a mix of single line and double line. There are a total of 394 gate valve blocks in this package! Blocks include a bare wedge gate valve. Also included are gate valves with a handwheel shown in plan, profile and rolled 45 degrees.
Dynamic Block Wedge Gate Valve with Flanges Example27.66 KB
Wedge Gate Valve with Flanges - Dynamic AutoCAD Blocks
All the blocks have been created on 'Layer 0' and can be either copied into your working drawing or can be copied into your pallettes. The drawing is saved as a .dwg file and includes the following blocks:
Wedge Gate valve - bare valve Top/ Front View
| Single Line | Double Line | Number of Blocks | |
|---|---|---|---|
| ANSI 150 | 2"-12" | 2"-24" | 19 |
| ANSI 300 | 2"-12" | 2"-24" | 19 |
| ANSI 600 | 2"-12" | 2"-24" | 19 |
| ANSI 900 | 2"-12" | 2"-24" | 19 |
| ANSI 1500 | 2"-12" | 2"-24" | 19 |
| ANSI 2500 | 2"-12" | 2"-12" | 14 |
| Total: | 109 |
Wedge Gate valve - Top View with a handwheel
| Single Line | Double Line | Number of Blocks | |
|---|---|---|---|
| ANSI 150 | 2"-12" | 2"-24" | 19 |
| ANSI 300 | 2"-12" | 2"-24" | 19 |
| ANSI 600 | 2"-12" | 2"-24" | 19 |
| ANSI 900 | 2"-12" | 2"-24" | 19 |
| ANSI 1500 | 2"-12" | 2"-20" | 19 |
| Total: | 95 |
Wedge Gate valve - Front View with handwheel
| Single Line | Double Line | Number of Blocks | |
|---|---|---|---|
| ANSI 150 | 2"-12" | 2"-24" | 19 |
| ANSI 300 | 2"-12" | 2"-24" | 19 |
| ANSI 600 | 2"-12" | 2"-24" | 19 |
| ANSI 900 | 2"-12" | 2"-24" | 19 |
| ANSI 1500 | 2"-12" | 2"-24" | 19 |
| Total: | 95 |
Wedge Gate valve - Front View with Handwheel and rolled 45 degrees
| Single Line | Double Line | Number of Blocks | |
|---|---|---|---|
| ANSI 150 | 2"-12" | 2"-24" | 19 |
| ANSI 300 | 2"-12" | 2"-24" | 19 |
| ANSI 600 | 2"-12" | 2"-24" | 19 |
| ANSI 900 | 2"-12" | 2"-24" | 19 |
| ANSI 1500 | 2"-12" | 2"-24" | 19 |
| Total: | 95 |
Drawing file will work in the following formats:
- AutoCAD 2013/ LT2013
- AutoCAD 2010/ LT2010
- AutoCAD 2004/ LT2004
Want to learn more about dynamic blocks? Check out the AutoCAD webpage!
Have questions about when to use these in your design? Check out our articles or datasheets:
- Valves - Article
- Gate Valves - Article
- Gate Valve Dimensions - Datasheets