Pipe - HDPE, ANSI DR 26.0, 80 PSI, IPS (in)

on . Posted in Pipe & Tubing Datasheets

  • ASTM D3350 - Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
  • ASTM F714 - Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
  • HDPE can provide up to 1.5 times the pipe pressure rating for a recurring surge and up to 2.0 times the pipe pressure rating for an occasional surge.
  • HDPE = High-density Polyethylene

 

Pipe - HDPE, ANSI DR 26.0, 80 PSI, IPS (in)

Pipe Size

(in)

Outside Diameter

(in)

Minimum Wall

(in)

Average Inside Diameter

(in)

Approx. Weight

(lbs/ft)

1 1/4 1.660 - - -
1 1/2 1.900 - - -
2 2.375 - - -
3 3.500 - - -
4 4.500 - - -
6 6.625 0.255 6.084 2.24
8 8.625 0.332 7.921 3.80
10 10.750 0.413 9.874 5.91
12 12.750 0.490 11.711 8.31
14 14.000 0.538 12.859 10.02
16 16.000 0.615 14.696 13.09
18 18.000 0.692 16.533 16.57
20 20.000 0.769 18.370 20.45
22 22.000 0.846 20.206 24.75
24 24.000 0.923 22.043 29.45
26 26.000 1.000 23.880 34.57
28 28.000 1.077 25.717 40.09
30 30.000 1.154 27.554 46.02
32 32.000 1.231 29.390 52.36
34 34.000 1.308 31.227 59.11
36 36.000 1.385 33.064 66.27
42 42.000 1.615 38.576 90.20
48 48.000 1.846 44.086 117.81
54 54.000 2.077 49.597 149.10

 

Piping Designer Logo 1