Pipe - HDPE, ANSI DR 13.5, 160 PSI, IPS (in)

Pipe - HDPE, ANSI DR 13.5, 160 PSI, IPS (in) ASTM D3350 - Standard Specification for Polyethylene Plastics Pipe and Fittings Materials ASTM F714 - Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter HDPE can provide up to 1.5 times the pipe pressure rating for a recurring surge and up to 2.0 times the pipe pressure rating for an occasional surge. HDPE = High-density Polyethylene
Pipe Size (NPS)	Outside Diameter (in)	Minimum Wall (in)	Average Inside Diameter (in)	Approx. Weight (lbs/ft)
1 1/4	1.660	0.123	1.399	0.26
1 1/2	1.900	0.141	1.601	0.34
2	2.375	0.176	2.002	0.53
3	3.500	0.259	2.951	1.16
4	4.500	0.333	3.794	1.92
6	6.625	0.491	5.584	4.15
8	8.625	0.639	7.270	7.04
10	10.750	0.796	9.062	10.93
12	12.750	0.944	10.749	15.38
14	14.000	1.037	11.802	18.54
16	16.000	1.185	13.488	24.22
18	18.000	1.333	15.174	30.65
20	20.000	1.481	16.860	37.84
22	22.000	1.630	18.544	45.79
24	24.000	1.778	20.231	54.49
26	26.000	1.926	21.917	63.95
28	28.000	2.074	23.603	74.17
30	30.000	2.222	25.289	85.14
32	32.000	2.370	26.976	96.87
34	34.000	2.519	28.660	109.36
36	36.000	2.667	30.346	122.60
42	42.000	3.111	35.405	166.88
48	48.000	-	-	-
54	54.000	-	-	-

Angle

Deaerator

Trend Line

Spring Tension