Pipe - HDPE, ANSI DR 9.0, 250 PSI, IPS (in)

Pipe - HDPE, ANSI DR 9.0, 250 PSI, IPS (in) ASTM D3350 - Standard Specification for Polyethylene Plastics Pipe and Fittings Materials ASTM F714 - Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter HDPE can provide up to 1.5 times the pipe pressure rating for a recurring surge and up to 2.0 times the pipe pressure rating for an occasional surge. HDPE = High-density Polyethylene
Pipe Size (in)	Outside Diameter (in)	Minimum Wall (in)	Average Inside Diameter (in)	Approx. Weight (lbs/ft)
1 1/4	1.660	0.184	1.270	0.37
1 1/2	1.900	0.211	1.453	0.49
2	2.375	0.264	1.815	0.77
3	3.500	0.389	2.675	1.66
4	4.500	0.500	3.440	2.75
6	6.625	0.736	5.065	5.96
8	8.625	0.958	6.594	10.11
10	10.750	1.194	8.219	15.70
12	12.750	1.417	9.746	22.08
14	14.000	1.556	10.701	26.63
16	16.000	1.778	12.231	34.78
18	18.000	2.000	13.760	44.02
20	20.000	2.222	15.289	54.34
22	22.000	2.444	16.819	65.75
24	24.000	2.667	18.346	78.25
26	26.000	2.889	19.875	91.84
28	28.000	3.111	21.405	106.51
30	30.000	3.333	22.934	122.27
32	32.000	3.556	24.462	139.12
34	34.000	3.778	25.991	157.05
36	36.000	4.000	27.520	176.07
42	42.000	-	-	-
48	48.000	-	-	-
54	54.000	-	-	-