Pipe - HDPE, ANSI DR 32.5, 63 PSI, IPS (in)

Pipe - HDPE, ANSI DR 32.5, 63 PSI, IPS (in) ASTM D3350 - Standard Specification for Polyethylene Plastics Pipe and Fittings Materials ASTM F714 - Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter HDPE can provide up to 1.5 times the pipe pressure rating for a recurring surge and up to 2.0 times the pipe pressure rating for an occasional surge. HDPE = High-density Polyethylene
Pipe Size (NPS)	Outside Diameter (in)	Minimum Wall (in)	Average Inside Diameter (in)	Approx. Weight (lbs/ft)
1 1/4	1.660	-	-	-
1 1/2	1.900	-	-	-
2	2.375	-	-	-
3	3.500	-	-	-
4	4.500	-	-	-
6	6.625	0.204	6.193	1.81
8	8.625	0.265	8.063	3.07
10	10.750	0.331	10.048	4.77
12	12.750	0.392	11.919	6.71
14	14.000	0.431	13.086	8.09
16	16.000	0.492	14.957	10.56
18	18.000	0.554	16.826	13.37
20	20.000	0.615	18.696	16.50
22	22.000	0.677	20.565	19.97
24	24.000	0.738	22.435	23.76
26	26.000	0.800	24.304	27.89
28	28.000	0.862	26.173	32.34
30	30.000	0.923	28.043	37.13
32	32.000	0.985	29.912	42.24
34	34.000	1.046	31.782	47.69
36	36.000	1.108	33.651	53.46
42	42.000	1.292	39.261	72.77
48	48.000	1.477	44.869	95.05
54	54.000	1.662	50.477	120.29

Flange Bolt Circle

Peak Discharge from Drainage Basin Runoff

Normally Closed

Center of Mass

Feet per Minute