Skip to main content

Pipe - HDPE, ANSI DR 26.0, 80 PSI, DIPS (in)

Pipe - HDPE, ANSI DR 26.0, 80 PSI, DIPS (in)

  • ASTM D3350 - Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
  • ASTM F714 - Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
  • HDPE can provide up to 1.5 times the pipe pressure rating for a recurring surge and up to 2.0 times the pipe pressure rating for an occasional surge.
  • HDPE = High-density Polyethylene
Pipe Size

(NPS)

Outside Diameter

(DIPS)

Minimum Wall

(in)

Average Inside Diameter

(in)

Approx. Weight

(lbs/ft)

4 4.800 - - -
6 6.900 0.265 6.338 2.43
8 9.050 0.348 8.312 4.19
10 11.100 0.427 10.195 6.30
12 13.200 0.508 12.123 8.91
14 15.300 0.588 14.053 11.96
16 17.400 0.669 15.982 15.48
18 19.500 0.750 17.910 19.44
20 21.600 0.831 19.838 23.86
24 25.800 0.992 23.697 34.03
30 32.000 1.231 29.390 52.37
36 38.300 1.473 35.177 75.00
42 44.500 1.712 40.871 101.28

 

Piping Designer Logo 1

Similar Articles

MOD_TAGS_SIMILAR_NO_MATCHING_TAGS