Flanged Lateral - AWWA C110, DI (in)

on . Posted in Ductile Iron Flanged Fitting Datasheets

  • Flanged lateral fittings are not included in AWWA C110/A21.10
  • For flange dimensions see Flange - ANSI Class 125, C110, DI
  • AWWA C110/A21.10 - Ductile-Iron and Gray-Iron Fittings (3" to 48")
  • AWWA C104/A21.4 - Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water
  • ASME B16.1 - Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 (Flange surfaces shall be faced and drilled in accordance with ANSI Class 125)
  • All ductile iron flanged fittings shall be rated for water pressure of 250 PSI.
  • Flanged ductile iron fittings in 24 inch and smaller sizes may be rated for 350 psi with the use of special gaskets.

data lateral flg didata lateral flg di 1

 

 

 

 

 

 

 

 

 

 

 

Pipe SizeFGApprox. Weight (lb)
RunBranch
3 3 10 3 50
4 3 12 3 70
4 4 12 3 75
6 4 14 1/2 3 1/2 105
6 6 14 1/2 3 1/2 130
8 4 17 1/2 4 1/2 153
8 6 17 1/2 4 1/2 190
8 8 17 1/2 4 1/2 200
10 4 20 1/2 5 230
10 6 20 1/2 5 290
10 8 20 1/2 5 335
10 10 20 1/2 5 300
12 4 24 1/2 5 1/2 355
12 6 24 1/2 5 1/2 370
12 8 24 1/2 5 1/2 395
12 10 24 1/2 5 1/2 420
12 12 24 1/2 5 1/2 460
14 6 27 6 500
14 8 27 6 525
14 10 27 6 555
14 12 27 6 600
14 14 27 6 640
Pipe SizeFGApprox. Weight (lb)
RunBranch
16 6 30 6 1/2 655
16 8 30 6 1/2 680
16 10 30 6 1/2 715
16 12 30 6 1/2 755
16 14 30 6 1/2 800
16 16 30 6 1/2 850
18 8 32 7 820
18 10 32 7 855
18 12 32 7 1005
18 14 32 7 940
18 16 32 7 990
18 18 32 7 1035
20 10 35 8 1095
20 12 35 8 1130
20 14 35 8 1170
20 16 35 8 1220
20 20 35 8 1345
24 24 40 1/2 9 2020
36 36 60 19 1/2 5740