Pipe - HDPE, ANSI DR 13.5, 160 PSI, IPS (in)
- ASTM D3350 - Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
- ASTM F714 - Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
- HDPE can provide up to 1.5 times the pipe pressure rating for a recurring surge and up to 2.0 times the pipe pressure rating for an occasional surge.
- HDPE = High-density Polyethylene
Pipe - HDPE, ANSI DR 13.5, 160 PSI, IPS (in) | ||||
---|---|---|---|---|
Pipe Size (NPS) | Outside Diameter (in) | Minimum Wall (in) | Average Inside Diameter (in) | Approx. Weight (lbs/ft) |
1 1/4 | 1.660 | 0.123 | 1.399 | 0.26 |
1 1/2 | 1.900 | 0.141 | 1.601 | 0.34 |
2 | 2.375 | 0.176 | 2.002 | 0.53 |
3 | 3.500 | 0.259 | 2.951 | 1.16 |
4 | 4.500 | 0.333 | 3.794 | 1.92 |
6 | 6.625 | 0.491 | 5.584 | 4.15 |
8 | 8.625 | 0.639 | 7.270 | 7.04 |
10 | 10.750 | 0.796 | 9.062 | 10.93 |
12 | 12.750 | 0.944 | 10.749 | 15.38 |
14 | 14.000 | 1.037 | 11.802 | 18.54 |
16 | 16.000 | 1.185 | 13.488 | 24.22 |
18 | 18.000 | 1.333 | 15.174 | 30.65 |
20 | 20.000 | 1.481 | 16.860 | 37.84 |
22 | 22.000 | 1.630 | 18.544 | 45.79 |
24 | 24.000 | 1.778 | 20.231 | 54.49 |
26 | 26.000 | 1.926 | 21.917 | 63.95 |
28 | 28.000 | 2.074 | 23.603 | 74.17 |
30 | 30.000 | 2.222 | 25.289 | 85.14 |
32 | 32.000 | 2.370 | 26.976 | 96.87 |
34 | 34.000 | 2.519 | 28.660 | 109.36 |
36 | 36.000 | 2.667 | 30.346 | 122.60 |
42 | 42.000 | 3.111 | 35.405 | 166.88 |
48 | 48.000 | - | - | - |
54 | 54.000 | - | - | - |