Pipe - HDPE, ANSI DR 11.0, 200 PSI, IPS (in)
- ASTM D3350 - Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
- ASTM F714 - Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
- HDPE can provide up to 1.5 times the pipe pressure rating for a recurring surge and up to 2.0 times the pipe pressure rating for an occasional surge.
- HDPE = High-density Polyethylene
Pipe - HDPE, ANSI DR 11.0, 200 PSI, IPS (in) | ||||
---|---|---|---|---|
Pipe Size (NPS) | Outside Diameter (IPS) |
Minimum Wall (in) | Average Inside Diameter (in) | Approx. Weight (lbs/ft) |
1 1/4 | 1.660 | 0.151 | 1.340 | 0.31 |
1 1/2 | 1.900 | 0.173 | 1.533 | 0.41 |
2 | 2.375 | 0.216 | 1.917 | 0.64 |
3 | 3.500 | 0.318 | 2.826 | 1.39 |
4 | 4.500 | 0.409 | 3.633 | 2.31 |
6 | 6.625 | 0.602 | 5.349 | 5.00 |
8 | 8.625 | 0.784 | 6.963 | 8.47 |
10 | 10.750 | 0.977 | 8.679 | 13.16 |
12 | 12.750 | 1.159 | 10.293 | 18.51 |
14 | 14.000 | 1.273 | 11.301 | 22.32 |
16 | 16.000 | 1.455 | 12.915 | 29.15 |
18 | 18.000 | 1.636 | 14.532 | 36.89 |
20 | 20.000 | 1.818 | 16.146 | 45.54 |
22 | 22.000 | 2.000 | 17.760 | 55.10 |
24 | 24.000 | 2.182 | 19.374 | 65.58 |
26 | 26.000 | 2.364 | 20.988 | 76.96 |
28 | 28.000 | 2.545 | 22.605 | 89.26 |
30 | 30.000 | 2.727 | 24.219 | 102.47 |
32 | 32.000 | 2.909 | 25.833 | 116.58 |
34 | 34.000 | 3.091 | 27.447 | 131.61 |
36 | 36.000 | 3.273 | 29.061 | 147.55 |
42 | 42.000 | 3.818 | 33.906 | 200.84 |
48 | 48.000 | - | - | - |
54 | 54.000 | - | - | - |