Pipe - HDPE, ANSI DR 9.0, 250 PSI, IPS (in)
- ASTM D3350 - Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
- ASTM F714 - Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
- HDPE can provide up to 1.5 times the pipe pressure rating for a recurring surge and up to 2.0 times the pipe pressure rating for an occasional surge.
- HDPE = High-density Polyethylene
Pipe - HDPE, ANSI DR 9.0, 250 PSI, IPS (in) | ||||
---|---|---|---|---|
Pipe Size (in) | Outside Diameter (in) | Minimum Wall (in) | Average Inside Diameter (in) | Approx. Weight (lbs/ft) |
1 1/4 | 1.660 | 0.184 | 1.270 | 0.37 |
1 1/2 | 1.900 | 0.211 | 1.453 | 0.49 |
2 | 2.375 | 0.264 | 1.815 | 0.77 |
3 | 3.500 | 0.389 | 2.675 | 1.66 |
4 | 4.500 | 0.500 | 3.440 | 2.75 |
6 | 6.625 | 0.736 | 5.065 | 5.96 |
8 | 8.625 | 0.958 | 6.594 | 10.11 |
10 | 10.750 | 1.194 | 8.219 | 15.70 |
12 | 12.750 | 1.417 | 9.746 | 22.08 |
14 | 14.000 | 1.556 | 10.701 | 26.63 |
16 | 16.000 | 1.778 | 12.231 | 34.78 |
18 | 18.000 | 2.000 | 13.760 | 44.02 |
20 | 20.000 | 2.222 | 15.289 | 54.34 |
22 | 22.000 | 2.444 | 16.819 | 65.75 |
24 | 24.000 | 2.667 | 18.346 | 78.25 |
26 | 26.000 | 2.889 | 19.875 | 91.84 |
28 | 28.000 | 3.111 | 21.405 | 106.51 |
30 | 30.000 | 3.333 | 22.934 | 122.27 |
32 | 32.000 | 3.556 | 24.462 | 139.12 |
34 | 34.000 | 3.778 | 25.991 | 157.05 |
36 | 36.000 | 4.000 | 27.520 | 176.07 |
42 | 42.000 | - | - | - |
48 | 48.000 | - | - | - |
54 | 54.000 | - | - | - |