Pipe - HDPE, ANSI DR 32.5, 63 PSI, IPS (in)

on . Posted in Pipe & Tubing Datasheets

  • ASTM D3350 - Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
  • ASTM F714 - Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
  • HDPE can provide up to 1.5 times the pipe pressure rating for a recurring surge and up to 2.0 times the pipe pressure rating for an occasional surge.
  • HDPE = High-density Polyethylene

 

Pipe - HDPE, ANSI DR 32.5, 63 PSI, IPS (in)

Pipe Size

(NPS)

Outside Diameter

(in)

Minimum Wall

(in)

Average Inside Diameter

(in)

Approx. Weight

(lbs/ft)

1 1/4 1.660 - - -
1 1/2 1.900 - - -
2 2.375 - - -
3 3.500 - - -
4 4.500 - - -
6 6.625 0.204 6.193 1.81
8 8.625 0.265 8.063 3.07
10 10.750 0.331 10.048 4.77
12 12.750 0.392 11.919 6.71
14 14.000 0.431 13.086 8.09
16 16.000 0.492 14.957 10.56
18 18.000 0.554 16.826 13.37
20 20.000 0.615 18.696 16.50
22 22.000 0.677 20.565 19.97
24 24.000 0.738 22.435 23.76
26 26.000 0.800 24.304 27.89
28 28.000 0.862 26.173 32.34
30 30.000 0.923 28.043 37.13
32 32.000 0.985 29.912 42.24
34 34.000 1.046 31.782 47.69
36 36.000 1.108 33.651 53.46
42 42.000 1.292 39.261 72.77
48 48.000 1.477 44.869 95.05
54 54.000 1.662 50.477 120.29

 

Piping Designer Logo 1