Flanged Bends and Tees with Base - AWWA C110, DI (in)

Flanged Bends and Tees with Base - AWWA C110, DI (in)
Pipe Size	T	U	V	Approx. Weight (lb)
Pipe Size	T	U	V	90°	LR 90°	Tee
3	4.88	5.00	0.50	38	41	47
4	5.50	6.00	0.50	50	60	75
6	7.00	7.00	0.62	85	100	115
8	8.38	9.00	0.88	145	180	195
10	9.75	9.00	0.88	210	315	315
12	11.25	11.00	1.00	300	430	450
14	12.50	11.00	1.00	400	580	570
16	13.75	11.00	1.00	505	740	710
18	15.00	13.50	1.12	645	-	900
20	16.00	13.50	1.12	805	-	1125
24	18.50	13.50	1.12	1215	-	1930
30	23.00	16.00	1.15	1945	-	-
36	26.00	16.00	1.15	2395	2895	-

* Base Under Bend

* Base Under Long Radius Bend

Tee Base

* Flanged fitting base for bends are not included in AWWA C110/A21.10
For flange dimensions see Flange - ANSI Class 125, C110, DI
These fittings are not included in ANSI/AWWA C110/A21.10 - Ductile-Iron and Gray-Iron Fittings (3" to 48")

Flanged Bends and Tees with Base - AWWA C110, DI (in)
Pipe Size	T	U	V	Approx. Weight (lb)
4 x 3	5.50	6	0.50	45
6 x 4	7.00	7	0.62	75
8 x 4	8.38	9	0.88	120
8 x 6	8.38	9	0.88	135
10 x 6	9.75	9	0.88	175
10 x 8	9.75	9	0.88	185
12 x 6	11.25	11	1.00	230
12 x 8	11.25	11	1.00	255
12 x 10	11.25	11	1.00	285

* Base Under Large End Reducing Bend data fitting base flg 4 di

* Base Under Small End Reducing Bend

* Flanged fitting base for bends are not included in AWWA C110/A21.10
For flange dimensions see Flange - ANSI Class 125, C110, DI
These fittings are not included in ANSI/AWWA C110/A21.10 - Ductile-Iron and Gray-Iron Fittings (3" to 48")

data fitting base flg 6 di Base Drilling Detail

Riprap Rock Size

Wrought Iron

Spring Constant

Atmospheric Pressure

Pipe - CU, ASTM Type L (in)