Pipe - HDPE, ANSI DR 11.0, 200 PSI, DIPS (in)
- ASTM D3350 - Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
- ASTM F714 - Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
- HDPE can provide up to 1.5 times the pipe pressure rating for a recurring surge and up to 2.0 times the pipe pressure rating for an occasional surge.
- HDPE = High-density Polyethylene
Pipe - HDPE, ANSI DR 11.0, 200 PSI, DIPS (in) | ||||
---|---|---|---|---|
Pipe Size (in) | Outside Diameter (in) | Minimum Wall (in) |
Average Inside Diameter (in) | Approx. Weight (lbs/ft) |
4 | 4.800 | 0.436 | 3.876 | 2.62 |
6 | 6.900 | 0.627 | 5.571 | 5.42 |
8 | 9.050 | 0.823 | 7.305 | 9.32 |
10 | 11.100 | 1.009 | 8.961 | 14.03 |
12 | 13.200 | 1.200 | 10.656 | 19.84 |
14 | 15.300 | 1.391 | 12.351 | 26.65 |
16 | 17.400 | 1.582 | 14.046 | 34.47 |
18 | 19.500 | 1.773 | 15.741 | 43.29 |
20 | 21.600 | 1.964 | 17.436 | 53.12 |
24 | 25.800 | 2.345 | 20.829 | 75.78 |
30 | 32.000 | 2.909 | 25.833 | 116.58 |
36 | 38.300 | 3.482 | 30.918 | 167.01 |
42 | 44.500 | - | - | - |